User's Manual

1312
Orient the
mount as shown
Step 2: Inserting the Memory Card
The V33 Plus accepts Micro SD memory cards (class 10 or
higher) with a maximum capacity of 256GB.
Depending on
the
memory
card
manufacturer
and
type, some cards
may
not be compatible with your
device. Using an incompatible card may damage
the device or the memory card or corrupt the data
stored on it.
Note: Before inserting or removing a memory card, first
ensure you’ve powered down the device.
3. Get Started
Installation
Video guide can be found at
https://www.rexingusa.com/support/videos/
Step 1: Mount the Dash Camera
Make sure that you mount the front camera in
a safe, appropriate location where it won’t obstruct
the driver’s view. Clean your windshield before applying
the mount. Wait at least 20 minutes after applying the
mount to the windshield before attaching the camera.
Inserting a memory card
1. If the device is powered on, press and hold the POWER
button to power down.
2. Insert the card in the orientation shown.
3. Push the card into the slot, listening for a click sound
signaling the card is securely inserted.
Removing the Memory Card
Before removing a memory card from your V33 Plus, you must
first dismount it for safe removal.
With the device powered down, press down the memory
card until you hear a click. Gently remove your finger (or other
pressing object) to allow the spring release to push the
memory card out of the slot.
Do not remove the memory card while the device is
transferring or accessing information. Doing so can result
in data loss or corruption or damage to the memory card or
device. Rexing is not responsible for losses that result from the
use of damaged memory cards, including the loss of data.