User's Manual

43
42
Watch out video tutorial on
https://youtu.be/0hRcKo0Bmko
Quick Review
Default setting: Off
Upon capturing an image, the
image will be previewed on the
display for a few seconds before
returning to Photo Mode.
Date Stamp
Default setting: Date/Time
Apply a date and/or time stamp to
captured images (works similarly
to the Date Stamp function in the
Video Menu on page 28).
6. Troubleshooting
Updating Firmware
Please note that we only recommend updating your
firmware if you experience issues with your camera.
Installing incorrect firmware can damage
your device.
Identify the correct firmware for your camera by following
the prompts on the rexingusa.com firmware portal.
To update your camera’s firmware:
1. Format the memory card using the Format function (See
Page 16).
2. Take note of your firmware version number (See Page 39
– Version).
3. On a computer, visit the firmware section of
www.rexingusa.com and follow the prompts to locate
the correct firmware for your camera.
4. Download the firmware zip file to your computer.
5. Unzip the file.
6. Move the resulting file (.bin) to the root of your memory
card.
7. Safely eject the card from computer,
then insert into your
unpowered camera.
8.
9.
Turn the camera on by connecting to a power source.
The camera will update automatically. The screen will stay
o
n but
the status light will stay on for up to 1
minute while
the firmware updates.
10. Important! Memory card needs to be formatted again
after updating. Failure to do this will result in the camera
attempting to update the firmware every time it’s powered
on.
11. After formatting, hold the POWER button to reboot the
camera. DO NOT disconnect the camera from the
power source.
12. Upon reboot, you may disconnect your camera from
power.