User's Manual

19
18
Step 7: Turning the Device On or Off
Press and hold the POWER button for a few seconds to turn
on the device. A welcome message will be displayed on the
screen. Doing the same to manually turn off the device and a
goodbye message will be displayed.
The V33 Plus will switch on or off automatically if you
keep it connected using the car charger. The
camera will automatically start recording when it is
powered on. After power is disconnected, the device
will shut down after 3 seconds.
Note: If your car cigarette lighter provides constant power, the
unit may not turn on or off automatically with the car.
4. Basic Operation
4.1 Automatic Recording
The device will automatically turn on and begin recording once
it receives power, such as when you start your car. The indicator
and the red dot icon on screen will flash while recording.
Display Control
To switch between camera views on the LCD display, hold
the UP button. Press the POWER button will turn on or off the
LCD screen, your display setting won't affect the way
recordings are captured.
Locking Videos
While recording, you can hold the OK button to manually lock
the current video clip. This will ensure that Loop Recording
won’t overwrite the clip when the memory card is full. You can
Press and hold the POWER button
to turn the device on manually
The camera automatically starts recording when it is powered on
QHD+QHD+QHD
Exposure