User Manual

3332
Auto Power O
Default setting: O
When enabled, this feature
allows the device to shut down
after a period of time in which
the camera isn’t recording.
Volume
Default setting: High
Enable or disable the device’s
sound eects.
Language
Default setting: English
Set your preferred device
language.
Frequency
Default setting: 60 Hz
Power supply specication
used in your country or
geographical region. The
United States users should
use 60 Hz (default).
Wi-Fi
Default setting: O
Turn this feature on to
temporarily enable Wi-Fi
feature (See Page 25).
Date/Time
Set the time and date on your
device.
To enter the date/time:
Time Lapse
After the car is turned o, the dash cam will perform as usual,
but the camera will capture videos and frames re-specied
intervals of time and condense them into a video time lapse,
which means your footage appears to be faster upon playback.
Pros: Dash cam will record everything after the car engine is
turned o.
Cons: It may drain your car battery; however, the smart hardwire
kit has low voltage protection function. When the smart hardwire
kit detected low car battery, the dash cam will automatically
shut down to protect your car battery
System Settings
Press MENU twice to open the Setup Menu (in Video Recording
Mode, you must rst stop recording which is done by pressing
UP).
• UP / DOWN – Change current value
• OK – Move to next value
• MENU – Conrm setting