User Manual

2928
Exposure
Default setting: +0.0
Manually adjust the camera’s
exposure value to brighten or
darken recordings. Positive
values brighten recordings
while negative values darken
them.
Record Audio
Default setting: On
Allows you to enable or disable
audio recording with your
videos.
You may choose to record
audio with video or turn o
the microphone so all recorded
videos will be muted.
Note: You can also use the MIC
button to toggle auto recording.
Date Stamp
Default setting: On
Stamp the date and time to the
bottom of your videos. Note
that the date and time stamp
cannot be removed from videos
if this feature was enabled at
the time of recording.
automatic le lock will be placed on the current video, preserving
your most crucial footage. Locked videos can be found on the
memory card under “\CARDV\MOVIE\RO”.
Note: Locked video les won’t be erased by Loop Recording. They
will remain on the memory card until they are manually deleted or
when the card is formatted.
Plate Number
Default setting: O
Enter your vehicle plate
number. The plate number
will be displayed at the
bottom of your videos.
To enter your license plate
number:
• UP / DOWN – Change
current value
• OK – Move to next value
• MENU – Conrm setting
Gravity Sensing
Default setting: Low
If a change in gravitational
forces is detected, such as
in the event of a vehicular
accident, the G-sensor will
signal to the camera, and an