User Manual
1918
Step 5: Turning the Device On or Off
Press and hold the POWER button for a few seconds to turn
on the device. A welcome message will be displayed onscreen.
To turn o the device, again press and hold the POWER button
for a few seconds. A goodbye message will be displayed
onscreen.
The V3 will switch on or o automatically if you keep
it connected using the car charger. The camera will
automatically start recording when it is powered on. After
power is diconnected, the device will shut down after 3
seconds.
Note: If your car cigarette lighter provides constant power, the unit
may not turn on or o automatically with the car.
4. Basic Operation
4.1 Automatic Recording
The device will automatically turn on and begin recording once
it receives power, such as when you start your car. The indicator
and the red dot icon on screen will ash while recording.
Display Control
To switch between cameraviews on the LCD display, hold the
UP button. Press the POWER button will turn on or o the LCD
screen, your display setting won’t aect the way recordings are
captured.
Locking Videos
While recording, you can hold the OK button to manually lock
the current video clip. This will ensure that Loop Recording
won’t overwrite the clip when the memory card is full. You can
Press and hold the POWER button
to turn the device on manually
The camera automatically starts recording when it is powered on