User Manual

Getting Started

Quick Start

REXING

ll Righ

3. Connecting the charger to the car's 12V DC outlet

Be sure to connect only the Rexing-approved charger designed and supplied

specifically for use with your device. Using an incompatible charger can

cause serious personal injury or damage to your device.

4. Format the memory card

To ensure the memory card works on the dash cam, we recommend using

the dash cam to format the memory card, (please refer to Formatting the

Memory Card section on Page 25).

DO NOT insert or remove a memory card while the device is powered on.

Charging the battery

Charge the device by connecting the camera via the USB car charger port. Use

only Rexing-approved chargers. Using unapproved chargers or cables can

damage the device or cause the battery to explode.

Connect the car charger’s jack to the USB charging port, and then plug the

charger into the car cigarette lighter or 12V DC power outlet.

• Battery is mainly used to save files in emergency. Please always

connect Rexing V2 to external power while it is in use.

• When device detects no power supply, it will automatically power off

after 5 seconds. To turn on the device again, you will need to do so

manually by pressing the ON / OFF button.