Manualshelf

User Manual

ManualsBrandsRexing ManualsDash CamsV1P 2.4 in. LCD FHD 1080p 170° Wide Angle Dual Channel Dashboard Camera Recorder with Rear Camera and G-Sensor
41424344454647484950
Operating your V1P Dashboard Camera
Updating Firmware
48
© 2015
REXING
A
ll Righ
ts
Re
s
er
v
ed
.
Updating Firmware
The following procedure will allow you to use the Rexing website to update
firmware for your V1P Dashboard Camera. This is necessary for enabling all
available features on your device.
1. Download the firmware file to your computer
2. Unzip the file
3. Format your memory card in your computer (or unit)
4. Copy the FW96650A.bin logo.jpg and logo2.jpg files to the root of your
memory card
5. Put card into camera
6. Power camera on (make sure the camera is plugged in)
7. The camera will update automatically. The screen will stay off but the status
light will light up; it will take 30-60 seconds
8. (important) After updating, format the memory card or it will flash every time
Downloaded from www.Manualslib.com manuals search engine