User Manual

Operating your V1P Dashboard Camera

Video Settings

REXING

ll Righ

Loop Recording

Recommend setting: 3 Minutes

With Loop Recording Mode enabled, the device will continuously erase older

video as it records new video, keeping only the images captured over a user-

selected time range. All video older than this range will be replaced with new

video. (Note: any locked video files on the memory card will remain protected,

and will not be automatically deleted during Loop Recording.)

It is recommended that you reformat a memory card after every time that

images are transferred from it to a computer, or at least once a month. This

keeps important elements of data and file structure clean, helping to prevent

error messages and missing images.

Remember to always make backup copies of all important data stored on the

device. The manufacturer’s warranty does not cover loss of data resulting from

user actions.

1. Press MENU once to enter Video Settings

2. Press the UP or DOWN button to navigate to the "Loop Recording" option

3. Press OK to view the current selection: 3min/5min/10min/OFF

4. Press the UP or DOWN button to make your selection

5. Press OK to confirm your entry

6. Press MENU to exit Video Settings

Downloaded from www.Manualslib.com manuals search engine