User Manual

Getting Started

Installing your V1P Dashboard Camera

REXING

ll Righ

Charging the battery

Charge the device by connecting the camera via the USB car charger port. Use

only Rexing-approved chargers. Using unapproved chargers or cables can

damage the device or cause the battery to explode.

Connect the car charger’s jack to the USB charging port, and then plug the

charger into the car cigarette lighter or 12V DC power outlet.

 Battery is mainly used to save files in emergency. Please always

connect Rexing V1P to external power while it is in use.

 When device detects no power supply, it will automatically power off

after 5 seconds. To turn on the device again, you will need to do so

manually by pressing the ON / OFF button.

 If the battery is completely discharged, the device will not turn on

immediately when the charger is connected. Allow a depleted battery

to charge for a few minutes before attempting to turn on the device.

 The device can be used while it is charging, although it may take

longer to fully charge the battery.

 If the device receives an unstable power supply while charging, the

screen may not function properly. If this happens, unplug the charger

from the device.

 While charging, the device may heat up. This is normal and should

not affect the device’s performance or lifespan.

Downloaded from www.Manualslib.com manuals search engine