Quick Start Guide

Step 4

Power on the Camera and Format the Memory Card

Place the camera on the mount and carefully route the power cable around the

windshield and tuck it in under the trim.

Power the camera by connecting the charger to the car cigarette lighter and the

camera.

The camera will shut down after 3 seconds when it's disconnect from the power

source and it should begin recording automatically the next time it is powered on.

To ensure the V1P Max records to your memory card properly and without error,

we strongly recommend you to format the card within the camera when you're

using the dash cam for the first time.

Note:

Always remember backup important data stored on the memory card before

formatting.

Plug the Mini

USB connector

to the dash cam

Route the

power cable

Plug the charger

into the power

outlet or a

cigarette lighter