V1P Max User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.
About Us Thank you for choosing REXING! We hope you love your new products as much as we do. If you need any assistance, or have any suggestions to help us improve, please contact us. care@rexingusa.com (877) 740-8004 Our support team will respond to you as soon as possible. Always a surprise in Rexing. Check us out here • https://www.facebook.com/rexingusa/ • https://www.instagram.com/rexingdashcam/ • https://www.rexingusa.com/support/registration/ • https://www.rexingusa.
Package Contents ue le Co ated Tiss Doub Doub le Co ated Tiss ue 1 3 2 4 V1P Max User Manual Safety Guide 安全ガイド The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com www.rexingusa.com 5 6 7 8 9 1. Rexing V1P Max Dash Cam 6. Car Charger 2. Rear camera with rear camera cable 7. Cable Management Tool 3. Mini-USB Cable 8. Safety Guide 4. Mount Plate & 3M Adhesive 9. User Manual 5.
Camera Overview 9 7 8 2 3 1 4 5 6 1. Power Button 7. Micro SD Card Slot 2. OK (Confirm) Button 8. Reset Button 3. REC (Record) Button 9. Rear Camera Port 4. MIC (Microphone) Button 5. Menu (Mode) Button 6.
1 2 3 4 5 00:00:20 WDR UHD P24+FHDP24 14 00:00:20 WDR 6 UHD P24+FHDP24 7 13 12 8 A A AA A A A A 04 / 10 / 2021 17 : 25 : 45 11 10 15 9 AAAAAAAA 04 / 10 / 2021 18 17 : 25 : 45 17 16 1. Recording Mode 10. Time (24H) 2. Recording (On) 11. Current Date Time 3. WDR Mode (On) 12. MIC (Off) 4. G-Sensor Sensitivity Level 13. Exposure Value 5. Recording Time (Current Clip) 14. Loop Recording Time Interval 6. Video Resolution 15. GPS Signal (connected) 7. Parking Mode (On)*** 16.
Get Started Step 1 Installing Adhesive Mount Place the 3M adhesive on the mount plate and properly orient the mount piece to the roof and hood line of the vehicle. Important! Ensure the T-interlock on the mount is oriented in the correct direction. Firmly press the mount onto the windshield. Wait at least 20 minutes before mounting the camera.
Step 2 Mount the Rear Camera Mount the rear camera as shown below. Use the included rear camera cable to connect the rear camera to the front camera.
Step 3 Insert the Memory Card The Rexing V1P Max accepts Class 10/ UHS-1 or higher Micro SD memory cards up to 256GB. You will need to insert a memory card before recording. Before inserting or removing a memory card, ensure you've powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push out. Press the POWER button for 3 seconds to turn the power off before inserting the card.
Step 4 Power on the Camera and Format the Memory Card Place the camera on the mount and carefully route the power cable around the windshield and tuck it in under the trim. Power the camera by connecting the charger to the car cigarette lighter and the camera.
To format the memory card, first press the REC button to stop recording. Then press the MENU button twice to enter the Setup Settings. Use the REC and MIC buttons and toggle to the Format. Press the OK button to confirm the format. Setup LCD F All data will be deleted Screen Saver Cancel Format OK Default Setting V.1.
Basic Operation Device Power The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e.: the vehicle is started). To turn the device on manually, press and hold the POWER button until the welcome screen appears. The camera will automatically start recording when power on.
Menu Settings Power the camera on, then press the REC button to stop recording. Press the MODE button and switch among video mode, image mode and playback mode. Press the MENU button once to enter the Video Settings, or press the MENU button twice to enter the Setup Settings menu.
Video Recording The camera will automatically start recording when the device receives a charge. The LED lights and the red dot will blink when the device is recording. Press the REC button to stop recording. 00:00:20 WDR These indicators will blink in red when the dash cam is recording.
Video Playback To playback a video on the device, press the REC button to stop recording. Press and hold the MODE button twice to enter the Playback mode. Use the REC and MIC buttons to toggle to the desired video. Press the OK button to play. During playback, use the OK (pause), MIC (fast forward) and REC (rewind) buttons to control the video playback.
To playback a video by using an SD card reader, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer. Parking Mode (Parking Monitor) To activate the Parking Mode, you'll need to connect to a smart hardwire kit or an intelligent hardwire kit. Parking mode provides surveillance on your parked vehicle. When the engine is off, hardwire kit is used to provide continuous power and protect your car battery from being discharged.
Time-lapse Recording: Record video in one frame per second to conserve memory and reduce the time it takes to review the video. G-Sensor Trigger Recording: The G-sensor detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. We suggest setting the “Gravity Sensing” to High sensitivity for Parking Mode Recording. The dash cam will remain off until a movement is detected.
Wi-Fi Connect Download the Rexing Connect app from the App Store/Google Play. 1. Press the REC button to stop recording then press the MENU button once to enter the Video Settings. 2. Use REC/MIC buttons and toggle to Wi-Fi to turn it on. 3. Turn on Wi-Fi on your phone, then find T5_XXXX from the network list and enter the default password 12345678 to connect. 4. Open the Rexing Connect app, tap “Connect” to enter the realtime video streaming view. 5.
Built-in GPS Logger GPS logger will record the speed and location of your vehicle as you drive. You can then access this information while playing back your recordings using the GPS Video player. Press the MENU button twice and enter the Setup Settings. Toggle to the GPS Speed Unit and select your preferred speed unit. After a GPS signal is found, the screen icon will turn from blue to green. Please visit https://www.rexingusa.com/support/videos/ to watch a video tutorial.
Taking and Reviewing Videos/Photos To take a photo, press REC button to stop recording. Press the MODE button once to enter photo mode. Then press the OK button to take a photo. To view/delete a video/photo, stop video recording and enter the Playback Mode. Toggle through the videos/photos to the one you want to view/delete. Press the MENU button once and toggle to the Delete option. Press the OK Button and select Delete Current or Delete All.
Warranty & Support Warranty The Rexing V1P Max Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
FCC ID: 2AW5W-V1PMAX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.