User Manual

1716
may not function properly. If the device is not operating
properly using a Rexing-approved charger, please contact
Customer Care ([e-mail]).
Step 3.2: Formatting the Memory Card
Before formatting your memory card, always remember
to make backup copies of all important data stored on the
device. The manufacturer’s warranty does not cover loss of
data resulting from user actions.
For best results, format the memory card using the Format
function on your camera.
It’s recommended that you format your memory card after
transferring les to your computer or at least once a month.
Using your camera to format a memory card:
1. Upon turning on the camera, press the REC button to stop
recording.
2. Press the MENU button twice to enter the Setup Menu.
3. Use the REC and MIC buttons to navigate to the “Format”
option.
4. Press OK to conrm your selection.
5. You will be notied that all data will be deleted. Scroll down
to “OK” and press the OK button to conrm.
6. If you followed the instructions above, you should see a
blue box asking you to please wait while the card is being
formatted. Formatting should only take a moment, and
you will be taken back to the Setup Menu once formatting
is complete.
7. At this point, discount from the power source. The camera
will shut down automatically after 3 seconds. The next
time the camera is connected to power, the camera should
start up and begin recording automatically.
Step 4: Mount the rear camera
Rear Camera Instalation
Plug the Rear Camera
into the Dashcam
Press the OK
button to conrm
formatting the
card
Press the Menu
button twice