V1P Gen3 User Manual The information in this manual is subject to change without notice. www.rexingusa.
About This Manual This device provides high-quality digital recording using Rexing’s high standards of design, construction and technological expertise. This user manual describes the device’s functions and features in detail. Please read this manual before using the device to ensure safe and proper use. Note that all descriptions included here are based on the device’s default settings. • Images and screenshots may differ in appearance from the actual product.
Table of Contents page page About This Manual Table of Contents 2 4 1. What’s in the box? 6 2. Camera Overview 8 5. Mode Setup Video Mode Settings System Settings Photo Settings 6. Troubleshooting Device Layout Buttons Status Icons 8 9 10 3.
The items supplied with the device and any available accessories may vary depending on your region. Appearances and specifications are subject to change without prior notice. Availability of accessories is subject to change. 1. What’s in the box? All supplied items are designed for use only with this device and may not be compatible with other devices. Malfunctions resulting from the use of unapproved accessories are not covered by the warranty service. 5.
Buttons 2. Camera Overview Device Layout Button Function Press: Toggle display on or off Hold: Turn the device on or off manually Menus: Confirm a selection Video Mode: Manually lock current recording Photo Mode: Take photo Playback Mode: Start / stop playback 6. 7. 1. 2. 4. 5. 8. Press: Enter menu, cycle through menus or exit current menu Hold: Change mode 3.
Status Icons Memory card detected Icon Meaning Video resolution Currently recording (blinking) Wide Dynamic Range enabled Exposure GPS searching for signal (animated) GPS signal acquired (no animation) Current recording locked Connected to power source Audio recording enabled Audio recording disabled Video Recording Mode Playback Mode Photo Mode Loop Recording 10 11
Step 1: Attach the front camera to the window mount 3. Getting Started Installation Make sure that you mount the front camera in a safe, appropriate location where it won’t obstruct the driver’s view. Clean your windshield before applying the mount. Wait at least 20 minutes after applying the mount to the windshield before attaching the camera. Video guide can be found at video.rexingusa.com. Step 2.
use of damaged memory cards, including the loss of data. Step 3.1: Powering the Camera Press the Power button to turn the power off You must always connect the V1P Gen3 to a power source while operating the camera. Connect the camera to your vehicle via the included car charger cable. Connect the larger end of the car charger cable to your car’s cigarette lighter (12V DC power outlet). Connect the other mini-USB end to the miniUSB port on the device. Inserting a memory card 1. 2. 3.
may not function properly. If the device is not operating properly using a Rexing-approved charger, please contact Customer Care (care@rexingusa.com). 2. 3. 4. 5. Step 3.2: Formatting the Memory Card Before formatting your memory card, always remember to make backup copies of all important data stored on the device. The manufacturer’s warranty does not cover loss of data resulting from user actions. For best results, format the memory card using the Format function on your camera.
Mount the rear camera as shown above. Use the provided rear camera cable to connect the rear camera to the front camera. Note: If your car cigarette lighter provides constant power, the unit may not turn on and off automatically with the car. Step 5: Connect the car charger to the car’s 12V DC outlet 4. Basic Operation Run the cable down from your camera to the 12V cigarette lighter port of your vehicle.
the current video clip. This will ensure that Loop Recording won’t overwrite the clip when the memory card is full. You can also lock videos after recording by using the Protect function in the Playback Menu. Locked videos can be found on the memory card under “\CARDV\MOVIE\RO”. Video recordings from the front and back cameras will be stored in chronological order on the memory card for easy navigation and playback.
3. 4. 5. Press OK once to view options to “Delete Current” recording or “Delete All” recordings. With “Delete All” selected, press OK. When prompted with “Erase All Images?” press the MIC button to scroll down to “OK” and press OK to delete all recordings. Using a USB cable Connect your camera to your computer using the provided USB cable and select “Mass Storage” to access your card storage. Your videos will be stored under “\CARDV\MOVIE”.
2. 3. menu bar and click File > Open to browse through your files. Navigate to the video file you want to add to the playback queue, select it and click “Open” to load it into the application. You may also select multiple videos at once. After a brief loading period, the (first) video should begin playing automatically, displaying speed and location information in real time along the right-side panels. 4.
your captures with your mobile device. To exit Wi-Fi, hold the REC button to return to Video Recording Mode. For further instruction regarding the Wi-Fi Connect feature, please visit www.rexingusa.com/wifi-connect/. 128GB 14 hours 20 hours 256GB 28 hours 40 hours Note: Choosing a single-channel resolution such as UHD, QHD, etc. will disable recording with the rear camera. Loop Recording 5. Mode setup Default setting: 1 Minute Video Mode Settings These settings affect your video recordings.
Exposure Default setting: +0.0 Manually adjust the camera’s exposure value to brighten or darken recordings. Positive values brighten recordings while negative values darken them. Record Audio Default setting: On Gravity Sensing Default setting: Low If a change in gravitational forces is detected, such as in the event of a vehicular accident, the g-sensor will signal to the camera, and an automatic file lock will be placed on the current video, preserving your most crucial footage.
System Settings Device Sound Press MENU twice to open the Setup Menu (in Video Recording Mode, you must first stop recording which is done by pressing REC). Default setting: On Wi-Fi Default setting: Off Turn this feature on to temporarily enable Wi-Fi mode (SeePage Enable or disable the device’s sound effects. Language Default setting: English 25). Set your language. Date/Time Frequency Set the time and date on your device.
Daylight Savings Default Setting Default setting: Off Performing this operation will reset all settings to their default values. When enabled, time is advanced forward by 1 hour to match daylight savings time. GPS Speed Unit Version Displays the current device firmware information. Default setting: mi/h Display speed information at the bottom of your recordings. Photo Settings Set Time Zone These settings affect your still photo captures. Hold MENU button 3 seconds to enter the Photo Mode.
Quality ISO Default setting: Fine Default setting: Auto Set the quality level of captured images. Lower quality images will take up less space on the memory card, but they are more visually compressed than higher quality images. Adjust the camera’s sensitivity to light when taking photos. The higher the ISO, the better the camera operates in low light, although images are produced with more noise (grainy-looking). Sharpness Exposure Default setting: Normal Default setting: +0.
before Mode. returning to Photo Date Stamp Default setting: Date/Time Apply a date and/or time stamp to captured images (works similarly to the Date Stamp function in the Video Menu). 6. Troubleshooting Updating Firmware Please note that we only recommend updating your firmware if you experience issues with your camera. Installing incorrect firmware can damage your device. Identify the correct firmware for your camera by following the prompts on the rexingusa.com firmware portal.
8. Warranty & Support CPU Class Novatek Display 2.4 inch, 4:3 TFT LCD Audio I/O Internal high-sensitivity mic and speaker Warranty Memory Support Class 10 or higher Micro SD card (up to 256GB) Gravity Sensor Low / Medium / High / Off The Rexing V1P Gen3 Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https:// www. rexingusa.com/support/registration), you can extend the warranty to 18 months.
FCCID: 2AW5W-V1P This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
