User Guide

"TIMUN" REXING GT WHEEL - QUICK GUIDE

3. INSTALLATION TO PC

Rexing GT Steering Wheel requires a powered USB hub for connection to PC. Plug the supplied

coiled USB cable into the wheel on the one end and a powered hub on the other end. The

powered USB hub should be plugged directly into your PC back USB connector.

4. 8-POSITION SWITCH USAGE

There are two 8-position switches on the Timun wheel, called "Brightness" and "Extra switch".

Brightness switch can be used either for LED brightness control or for mapping different funtions

to it.

Tip: We don't recommend to map the Brightness switch to any functions if you want to use it for

brightness control. If you will NOT use it for brightness control, in Simhub it is necessary to disable

it in the application: In "LEDs" tab set "Potentiometer control" to "Disabled".

To bind Position1 to any function in your game of choice:

 place switch to Position2

 click to assign this function in the game configuration

 when the game is waiting for your input, turn the switch to Position1.

To bind Position2 to "Pit display", for example:

 place switch to Position 1 or 3 (any position right next to the position you want to assign)

 click to assign "Pit display" in the game configuration

 when the game is asking for your input, turn the switch to Position2.

You can do the same for the remaining postions/screens.