Quick Start Guide

3.
1. 2.
4.
5.
6.
7.
8.
2.
11. 12. 13.
3. 4.
6. 7. 9.8.
5. 10.
1.
FM StationBluetoothDriving Video
AppsPlay Store
Touch to choose music.
15:27
Thu, 1 August GPS Navigation
0.0
330
33
0
240
21
0
150
1
2
0
60
3
0
N
W
S
E
km/h
15:27
Thu, 1 August
Micro SD
0
S800
Quick Start Guide
S800
Quick Start Guide
Please read
What’s in the Box? Camera Overview Overview
Thank you for choosing REXING! Please reach us via
[e-mail] or call us at [phone] if you need
assistance or have any suggestions to improve the products.
Our support team will respond you as soon as possible.
Rexing always surprises. Check us out here.
Screen Icons
www.rexingusa.com/support/registration/
/rexingusa
@rexingdashcam
1. LCD Full Touch Screen
2. USB Port
3. SIM Card Slot
4. GPS Antenna Port
5. Power Button
6. Rear Camera Port
7. Micro SD Card Port
8. Reset Button
9. Camera Angle Adjustment Dial
10. 3M Adhesive Mount
11. Front Camera
12. Slide Adhesive Mount On
13. Slide Adhesive Mount O
1. Quick Start Guide
2. Safety Guide
3. Car Power Connector (12ft)
4. 3M Adhesive Mount
5. Cable Adhesive Spacer
6. Cable Management Tool
7. Rexing S800 Dashboard Camera
8. Rear Camera with Cable
Time and Date Compass
Go Back
Home
Browsing
History
BluetoothBattery
Battery Charging Music (not playing)
Location (not found)
Wi-Fi Signal Acquired
4G LTE Signal
Settings Music Player App Store Car Assist
Google Play Store Volume Control Brightness Control
Video Recording (o)
Radio
GPS Navigation
(no signal)
Installation
Step 1:
Install the Adhesive Mount
Orient the mount as shown on the illustration above.
Clean your windshield surface thoroughly and allow it to dry
before applying the static cling. Peel o one plastic layer from
the static cling and apply it to your preferred spot. Peel o the
other plastic layer and attach the Rexing adhesive mount onto it.
Make sure the mount is facing to the correct slide in direction.
Firmly press the mount onto the windshield. Wait at least
20 minutes before mounting the camera.
Step 3: Power the Camera and Format the Memory
Card
Power the camera by connecting the charger to the car cigarette
lighter and camera. Before you start using a new memory card,
you must format the card within the camera using the format
function. This will ensure the S800 records to your memory card
properly and without error. Always backup important data stored
on the memory card before formatting.
Enjoy Your Product!
www.rexingusa.com
https://www.rexingusa.com/support/
product-support/
Download the
Rexing S800 Manual
Top
Orient the
mount as shown
Bottom
Side
Front
Step 2:
Insert the Memory Card
The Rexing S800 accepts [Class 10/
UHS-1 or higher] Micro SD memory
cards up to 256GB. You will need
to insert a memory card before
you can begin recording. Before
inserting or removing a memory
card, rst ensure you’ve powered
down the device. Please go to
for more details of the SIM card
activation and functions.
www.rexingusa.com/smart-connect/
38527_RexingUSA_Graphic-Design_Superside_FinalFile.indd 1 10/10/2019 3:55 PM