User Manual

Clear Alarm

After the clock is set, the original setting of the clock will not change even if the

power is off.

Clock Memory

When the alarm sounds, touch control area once to enter the snooze mode; it will

ring again after 10 minutes, and repeat this cycle; If there is no action within 1

minute of continuous ringing, the alarm will stop.

Snooze

4. When the hour adjustment is complete, press the button again to enter the

setting of the next digit; when the hours and minutes have been set, press the

button again to confirm. A long beep indicates that the repeat alarm clock is

successfully set.

5. When the time of the repeat alarm is triggered, the alarm icon is always on. The

buzzer will also intermittently beep, light up, and flash simultaneously. After 1

minute, the buzzer will stop automatically, and the light will go out. If any button is

pressed during the alarm period, it will end immediately.

6. When the alarm is over, the charger will retain the data for the repeat alarm in the

memory, which means the alarm will still be there, and when the next alarm time

comes, the alarm will ring again

Hold the button, a long beep indicate that the alarm data has been cleared

from the memory (including non-repeat alarm and repeat alarm).