User Manual

1. Press the button to enter the time setting mode, and the tens digit of the hours

will start to flash.

2. Use the and buttons to adjust the time.

3. If no button is in operation for more than 10 seconds when any number is flashing,

the setting edit will be canceled, and the current setting data will be invalid. If you

re-press any button, the Time Setting will restart.

4. When the hour adjustment is complete, press the button again to enter the

setting of the next digit; when the hours and minutes have been set, press the

button again to confirm. You'll hear a long beep when the time setting is successful.

Time Setting

(hour/minute adjusment)

Features

1. Auto-recognition & aligning will take place after the device is on; the night light and

clock display panel will be on constantly after set up.

2. When a phone is placed on the charger, the panel will automatically scan the phone

to find the best location for a fast, wireless charge. The display will show a wireless

charging icon.

3. After the panel recognizes the mobile phone, if it finds that it does not support

wireless charging, the wireless charging icon will flash quickly for 5 seconds, and

then the indicator will go out.

4. If the phone is placed on the panel and the panel fails to recognize the phone

automatically, you can click or button to reactivate the panel’s

auto-recognition function (This function is not available in the clock and the alarm

setting mode).

5. Fully charge indication: The display's charging icon on the bottom right is on.