S3 Dash Cam User Manual The information in this manual is subject to change without notice.
We hope you love your new products as much as we do. If you need any assistance, or have any suggestions to help us improve, please contact us. Our support team will respond to you as soon as possible. Always a surprise in Rexing.
What's in the box？ OK M 1 2 3 S3 Dash Cam User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved 4 5 6 1. Rexing S3 3-Channel Dash Cam 4. Adhesive Mount 2. Power Cable with GPS Logger (12ft) 5. User Manual 3. Cable Management Kit 6.
POWER Camera Overview 1 2 R M OK 3 11 9 4 5 6 7 8 10 1. Power Port 2. Micro SD Card Slot 3. Reset Pin Hole 4. Menu Button, Mode Switch Button 7. Screen-view Switching, Audio Button, Down Button 8. Confirm Button, Video Lock Button, Wi-Fi Button 9. Rotating Front Camera (90°) 5. Record Button, Photo Button, Up Button 10. Rotating Rear/Cabin Cameras (180° horizontal and 270° vertical) 6. Power Button, Screen Button 11.
Button Function • Press to turn on or turn off the screen • Press and hold for 3 seconds to turn the device on or off OK M • Press to confirm a selection in settings • Lock a Video: Press to manually lock / unlock a video file while recording • Press and hold for about 3 seconds to turn on/off the Wi-Fi Please press the Record Button to stop recording first.
Screen Icons 1 2 3 00:25 4 5 6 7 8 9 10 11 1080P*3 11/10/2021 15:25:04 1. Recording Mode 7. Wi-Fi Signal 2. Recording Indicator 8. GPS Signal 3. Recording Time 9. Microphone 4. Resolution 10. SD Card 5. Date 11. Power Indicator 6.
Installation Step 1 Installing Adhesive Mount Place the 3M adhesive on the mount plate and properly orient the mount piece to the roof and hood line of the vehicle. Important! Ensure the T-interlock on the mount is oriented in the correct direction. Firmly press the mount onto the windshield. Wait at least 20 minutes before mounting the camera.
Step 2 Mount the Rear Camera Mount the rear camera as shown below. Use the included rear camera cable to connect the rear camera to the front camera.
Step 3 Insert the Memory Card The Rexing S3 accepts Class 10/ UHS-1 or higher Micro SD memory cards up to 256GB. You will need to insert a memory card before recording. Before inserting or removing a memory card, ensure you've powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
Step 4 Power on the Camera and Format the Memory Card Place the camera on the mount and carefully route the power cable around the windshield and tuck it in under the trim. Power the camera by connecting the charger to the car cigarette lighter and the camera. M OK The camera will shut down after 3 seconds when it's disconnect from the power source and it should begin recording automatically the next time it is powered on.
10
Video Playback To playback a video on the device, press the Record button to stop recording. Press and hold the Mode button to enter the playback mode. Use the the Up and Down buttons to toggle to the desired video. Press the OK button to play. During playback, use the OK (pause), Up (rewind) and Down (fast forward) buttons to control the video playback. M OK To playback a video by using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.
Menu Settings Loop Recording With loop recording mode enabled, the device will continuously erase the oldest video once the memory card reaches the storage limit. The video will be recorded and kept with the user-selected time range. Time Lapse Record The time lapse record can be selected in 1FPS/2FPS/4FPS.
Note: Locked video files won’t be erased by Loop Recording, they will remain on the memory card until they are manually deleted, or when the card is formatted. Date Stamp You have the option to display the date and time in your videos. Note that the date and time stamp cannot be removed from videos if this feature was enabled at the time of recording. Recording Audio You may choose to record audio with video, or turn off the microphone so that all recorded videos will be muted.
Screen Saver Select a time duration for the screen to stay lit after recording starts.
Parking Monitor (Parking Surveillance Mode) Parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged. To enable the Parking Monitor, you'll need to connect it with the Smart Hardwire Kit (ASIN B07RN24B7V, sold separately).
There are 2 options under parking mode: We recommend using the Time Lapse option. • Time Lapse Record: Record video in one frame per second to conserve memory and reduce the time it takes to review video. • Gravity Sensing Record: The Gravity Sensing detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. We suggest setting the “Gravity Sensing” to High sensitivity for Parking Mode Recording.
Date and Time Use the following procedure to change the device’s time and date. Set Time Zone Use the following procedure to change the device’s time zone. The GPS logger is integrated on the power cable, which allows you to view your speed and location when you playback your recordings using the GPS video player. After a GPS signal is found, the screen icon will turn from blue to green. Please visit https://www.rexingusa.com/support/videos/ to watch a video tutorial.
Wi-Fi With the dash cam built-in Wi-Fi, you can use your smart device as a remote camera, viewfinder, and download files to your phone. Please disconnect the Wi-Fi connection first if you want to operate on the dash cam. 1. Press the Record button to stop recording 2. Press the Menu button twice to enter General Settings 3. Press the Up or Down button to toggle to Wi-Fi 4. Press the OK button to turn it on/off 5. Press and hold the Menu button for 3 seconds to exit.
Open Settings on your phone (make sure that the Wi-Fi has turned on) and find the SSID in the network list, then enter the default password 12345678 to connect. Once it’s connected, the Wi-Fi icon on the dash cam screen will turn to green. Open the Rexing Connect app and press connect to complete the pairing. Wi-Fi Connect Connect Restore Factory Settings Performing this operation will reset all of your device's settings to their original values. Note: Any user-customized settings will be lost.
Warranty & Support Warranty The Rexing S3 Dash Cam comes with a full 12-month warranty. If you register your product on our official site https://www.rexingusa.com/support/registration, you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
FCCID: 2AW5W-S3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
