User's Manual

8
Basic Operation
Main Interface
System Setup
I. Open the Setup Menu
Press the Menu Button to open system menu setup. Select Settings. Press the
Up/Down Button to change the option and press the OK Button to confirm.
II. Video Mode - Setup
Select Record on the main menu. Press the OK Button to start/pause video
recording of the device or press the Record Button to pause/start video
recording.
Note: Please format the MicroSD card during the initial operation.
Meanwhile, perform selective setups to the primary options, such as setting
the device’s system time. Video Resolution: FHDP30+FHDP30,
FHDP30+HDP30
1. Video Duration: 1, 2, or 3 minutes
2. WDR: ON/OFF
3. G-SENSOR: Off/High/Moderate/Low
After the device is started, it may sense shock/impact caused by a certain
level of force (the higher the sensitivity setting, the smaller the force
required). This function will lock the video at the time of detection and save
it as a protected video. Meanwhile an icon indicating that the device is locked
will be shown on top of the display.
4. Time-lapse Monitoring Duration: 12h, 24h, 48h
5. Exposure Compensation: +5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0,
-4/3, -5/3
6. DVR Audio: Off/On
7. Date Stamp: Off/On
III. System Menu Setup
1. Date/Time: Year, Month, Day, Hour, Minute, Second (RTC system time
setup). Press the OK Button to access [Date/Time] of system setup. Press