User's Manual

1
Notice
1. Menu Setup Operation: The menu is to be set up in non-video mode.
If the device is in video mode, proceed after stopping the video
recording.
2. Memory card: A new card must be formatted to the machine before
use. Continuous image recording for long periods of time may
produce protected files that are not subject to long-term protection
(these files may not be overwritten during loop recording) and
storage fragments, which need to be cleared regularly in order to
save stable storage space.
3. Standard Voltage for On-board Charger: Standard input voltage is
configured at 12V. If a charge voltage greater than 12V is found,
contact your dealer or our service center to replace it with an
applicable charger. An OEM charger must be used.
4. Movement Detection (Motion Detection) and Parking Monitor: Do
not enable this function during driving. When it is enabled, repeated
start/stop recording may affect the integrity of your video.
5. Do not install the device within the range that could be impacted by
airbag or in a location that interferes with the driver’s view or other
safe operation of the vehicle. Make sure it is securely mounted.
6. The features described in the operation manual are available for all
products of the same type. Your model may have come with optional
or additional functions. Menu operations may vary. Please refer to
the instructions that apply to your actual product.
Warning
The battery (module or pack) must not be expose to an overheat
environment such as direct sunlight or flame.
Never remove, strike, or squeeze the battery or put it in fire. Stop using the
battery if it is ballooned, warped, leaking, or shows any other visible signs
of damage.
Overview
Thank you for choosing REXING! We hope you love your new
products as much as we do.