User's Manual

11
When using the USB cable to connect with a computer, the [UP] and
[DOWN] buttons can be used to select options in the pop-up menu. Use the
[OK] button to confirm your selection.
1. Mass Storage: Can be used to play a file in the device or copy any file to
your computer.
2. Video: Video can be used as a power source for video recording.
Parking Monitor
Note: A Smart Hardwire Kit (sold separately) is required to activate the
parking monitor feature. A USB cable cannot provide this function.
I. Power Voltage Protection
1. From the Power Voltage menu setup on the main menu, select a voltage
（11.8-12.5V）for switching off the device when the car engine is turned off
for parking. For example, 11.8V means that the device automatically
switches off when the detected vehicle battery voltage drops to less than
11.8V.
II. Monitoring Mode
In the monitoring mode menu setup on the main page, when a smart hardwire
connection is detected, turning on the parking monitor will enable modes:
Super Night Scene and Time-Lapse video monitoring.
1. Time-Lapse Video Monitoring: A video recorded in parking mode has
only an approximate size of about one sixth to one tenth that of a normal
video. This enables the user to save as much video as possible.
2. Super Night Vision: Time lapse photography in parking monitoring mode
is recorded at sixty frames per minute. This function allows for clearer video
during low-light or night conditions.
Wi-Fi
Record
Playback
Parking
Power Voltage
Settings
Power Voltage
Wi-Fi
Record
Playback
Parking Monitor
Power Voltage
Settings
Parking Mode
OFF
Parking Monitor
Super Night Scene
Time-Lapse video monitoring