S1 Pro User Manual The information in this manual is subject to change without notice. www.rexingusa.
Notice 1. Menu Setup Operation: The menu is to be set up in non-video mode. If the device is in video mode, proceed after stopping the video recording. 2. Memory card: A new card must be formatted to the device before use. Continuous image recording for long periods of time may produce protected files that are not subject to long-term protection (these files may not be overwritten during loop recording) and storage fragments, which need to be cleared regularly in order to save stable storage space. 3.
! Warning The battery (module or pack) must not be expose to an overheat environment such as direct sunlight or flame. Never remove, strike, or squeeze the battery or put it in fire. Stop using the battery if it is ballooned, warped, leaking, or shows any other visible signs of damage.
Overview Thank you for choosing REXING! Thank you for choosing REXING! We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us. You can reach us via care@rexingusa.com (877) 740-8004 Our support team will respond you as soon as possible. Check us out here. • https://www.facebook.com/rexingusa/ • https://www.instagram.com/rexingdashcam/ • https://www.rexingusa.
What’s in the box? 1 2 3 4 S1 Pro User Manual The information in this manual is subject to change without notice. www.rexingusa.com. 5 6 7 1. Rexing S1 Pro Dash Camera 5. 3M Adhesive Mount 2. Rear Camera with Extension Cable (20ft) 6. USB Computer Cable 3. Free Smart Hardwire Kit 8. Quick Start Guide 8 7. Cable Management Tool 4.
Table of Contents Camera Overview 6 Installation 9 Basic Operations 12 Mobile Connection 20 GPS Player 27 Product Specifications 30 General Troubleshooting 31 Warranty and Support 32 5
Camera Overview I. Visual Features Smart Hardwire Kit Socket GPS Socket 6 7 Rearview Camera Socket USB 5V Socket 8 1 2 3 4 5 IR light Front Camera Cabin Camera 1. Menu/Mode Button 5. OK Button 2. Record/Up Button 6. Power Cord Connection Port 3. Power Button 7. Rearview Camera Connection Port 4. Down/Toggle Button 8. Reset Pinhole Note: GPS is an optional feature, needs to connect to the included GPS Logger. The S1 Pro does not support memory expansion.
Buttons and Description Buttons Description M Button (Menu/Mode Switch) 1. In standby mode, press this button to start/stop the related menu options such as recording mode, photography mode, playback mode. 2. In recording mode, press and hold the button for 3 second to enter picture-taking and playback interface. Depress it again to exit. Record/Up/MIC Button 1. In standby mode, press this button to start/pause video recording. 2. Video Mode: Depress this button to start/stop audio recording. 3.
OK Button 1. This button functions as a confirmation in each of the setups. 2. In video recording, press this button to start emergency recording. 3. Depress this button to switch Wi-Fi on/off. 4. In photography mode or playback mode, press the button to take a picture or play back a file.
Installation 1. Turn off the car’s engine. 2. Secure the dashcam to a place close to the original rearview mirror. 3. Plug the GPS module into the GPS port and secure the module to a position close to A-pillar of the car. The antenna receiver side (the side without 3M adhesive) faces the outside and the side with 3M adhesive faces down. It should be properly secured. 4. Plug the charger into the car’s cigarette lighter. Connect the device to the cigarette lighter through the car charger.
Installation Instructions Optimum Installation Location Power Cable Wiring Location 6.
For the rearview camera, there are two wiring options as shown in the above figure. The first part of both options is characterized with concealed wire routing against the edges of the door(s). a. The rearview camera can be mounted directly above the rear window inside the car. b. The rearview camera can be mounted directly above the car’s license plate. We recommend that you install all components beforehand according to the above drawing and test the system by using the on-board charger power supply.
Basic Operations Main Interface Wifi Record Playback Parking Power Volt Settings M OK System Setup I. Open the Setup Menu Press the Menu Button to open system menu setup. Select Settings. Press the Up/Down Button to change the option and press the OK Button to confirm. II. Video Mode - Setup Select Record on the main menu. Press the OK Button to start/pause video recording of the device or press the Record Button to pause/start video recording.
2. WDR: ON/OFF. 3. G-SENSOR: Off/High/Moderate/Low After the device is started, it may sense shock/impact caused by a certain level of force (the higher the sensitivity setting, the smaller the force required). This function will lock the video at the time of detection and save it as a protected video. Meanwhile an icon indicating that the device is locked will be shown on top of the display. 4. Time-lapse Monitoring Duration: 12h, 24h, 48h 5. Exposure Compensation: +5/3, +4/3, +1.0, +2/3, +1/3, +0.
2. Screen Backlight: Off, 1, 3, and 5 minutes. When Off is selected, the screen remains on. Select 1/3/5 minutes. Without any operation, the screen backlight turns off automatically after a predetermined length of time, but the device will keep recording as normal. 3. Key Tone: Off/On 4. Language Setup: English, French, German, Spanish, Italian, Portuguese, Simplified Chinese, Japanese, Traditional Chinese, and Russian. 5. Frequency: 50HZ, 60HZ 6. IR Light Mode: Auto, On, Off 7.
Taking Pictures I. Taking a Picture Depress the Menu Button to switch to the picture taking mode. Press the OK Button once to take a picture. II. Picture Mode Setup When the picture taking function is in standby, press the Menu Button to access the picture taking setup menu. Use the Record/UP button and Record/DOWN button to select parameters. Press the OK Button to save your setup selections and return to the previous menu. Press the Menu Button to exit setup when complete. 1.
8. ISO: Auto, 100, 200, 400 9. Exposure Compensation: +5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3 10. Anti-Shock: Off/On 11. Quick Preview: Off, 2s, 5s After taking a picture, time setting will be discontinued on the image, so as to allow you to determine if the picture is desirable 12. Date Stamp: Off, Date, Date/Time. Playback and Delete a File I. Browsing Files Select the playback folder on the main menu or depress the Menu Button to switch to playback mode.
Delete: Delete a single file or all files. Note: Locked files cannot be simply deleted. Unlock the file before you need to delete it. Protection Lock: Lock and save unprotected files. A locked file cannot be overwritten. Unlock: Remove the protective feature of a protected file. Simply delete the file once it is unlocked. IV. Slide View Recorded files are played automatically at a set time interval. V. Back to homepage Return directly to the homepage.
Parking Monitor Note: A Smart Hardwire Kit (included in the package) is required to activate the parking monitor feature. A USB cable cannot provide this function. I. Power Voltage Protection From the Power Voltage menu setup on the main menu, select a voltage (11.8-12.5V）for switching off the device when the car engine is turned off for parking. For example, 11.8V means that the device automatically switches off when the detected vehicle battery voltage drops to less than 11.8V.
Parking Mode Wifi Record Playback Parking Power Volt Settings M OK OFF Parking Monitor Super Night Scene Time-Lapse video monitoring M OK 1. Time-Lapse Video Monitoring: A video recorded in parking mode has only an approximate size of about one sixth to one tenth that of a normal video. This enables the user to save as much video as possible. 2. Super Night Vision: Time lapse photography in parking monitoring mode is recorded at sixty frames per minute.
Mobile Connection When the device is paired to a mobile phone via Wi-Fi, it can be controlled through the Mobile App. Basic Operations: I. Download the Rexing Connect App 1. Please go to RexingUSA website and download the app for Android or Apple iOS systems.
2. Open the app after installation. There will be a pop-up message asking if you will allow Rexing Connect to access the your location. Click as shown in the picture: 10:44 App Store Allow Rexing Connect to use your location? Please click “OK” to allow access If you don’t allow it, you won’t be able to show your location in the shared activity Precise: on Allow Once Allow While Using Ap Don’t Allow Connect Saved Shared Profile III.
1. Select Wi-Fi ON/OFF on the main menu or press the OK Button to turn on the Wi-Fi of the device. Press it again to turn the Wi-Fi off. As shown below: 10:44 LTE AP Mode Wifi SSID: E89_502664 Password: 12345678 Refresh M OK M WiFi_OFF 4K Video Resolution OK Wi-Fi Connect Connect NVT_CARDV0437 Unpair camera Connect Saved Shared Profile 2. Search for Wi-Fi on your phone and find SSID: E89_***. Input the password for your connection. The default password for the device is 12345678. 3.
4. Click the Saved button on the bottom to check the video files and pictures. You may simply click the file to play it online or download it to your mobile phone as shown in the picture: 10:44 LTE Videos Pictures 13/09/2020 20200913165525_000049… 13/09/2020 16:55:48 33.03 MB 20200913165525_000049… 13/09/2020 16:55:48 33.03 MB 20200913165525_000049… 13/09/2020 16:55:48 33.03 MB 20200913165525_000049… 13/09/2020 16:55:48 33.
IV. App Overview: 10:44 LTE 12:56:20 Record/Stop Return Change View Switching to Photo Mode Videos Photos Settings 1. Press the Record/Stop button to pause/start recording. Note: To begin a new setup, use the Settings menu shown below, press this button to pause the recording before beginning a new setup.
2. Press the Settings button on the bottom and set up the parameters of the system menu as shown in the picture: 10:44 LTE Settings Wi - Fi Password Audio Recording Date Stamp Loop Recording 1MIN G-sensor Sensitivity LOW This setting determines how force is needed to trigger an automatic file lock. FHD 1080 P30 Video Resolution Format the memory card Firmware version T501AA.96663.4689.201...
3. Click the Photo button on the bottom to review photos. 4. Click the Change View button on the top to toggle between camera views from the front camera, cabin camera, and rearview camera. 5. Click the button Switch to Photo Mode in the middle to take a picture in real time. 6. Click the button Record/Stop on the top to quickly stop/start the video and audio recordings. Note: The information provided is based on the current version of the app. The pictures shown are for reference only.
GPS Player I.
II. Installation and Operation of GPS Player 1. Unzip file LUCKY PLAYER and then double click 2. After installation you will see the icon Double-click to use it, as shown below: LUCKY p l a y e r LUCKY p l a y e r setup.en Lucky Player Archive LUCKY p l a y e r View Map Help to install. on your desktop. Map Auto Picture In Picture ADD REMOVE 00:00:00 Max Speed 0 km/h Average Speed 0 km/h X 0.00 Y 0.00 Z 0.00 N 0’0’0.00” E 0’0’0.00” km/h Total Distance 0 km/h 3.
4. Click allow blocked content to confirm. Click Yes to display a map with GPS tracking as shown below: Security Warning Allowing content (such as script and ActiveX) may be helpful for you, but the content may be harmful to your computer. ! Are you sure to run this file? Yes No ADD to load the video file with GPS tracking 5. Click on the GPS player information or directly drag the video file to the player window. The computer is connected to the Internet while the video is being played.
Product Specifications SDRAM Built-in Speaker Built-in MIC Built-in Display 3.0" TFT Video Resolution 1080P + 1080P + 1080P Loop Recording Support 1, 2, and 3 minutes Parking Monitor Yes G-Sensor Yes Video format H.264 Picture format JPG Operating Temperature -4°F ~ 150°F Input Current DC 5V 1500mA Note: Product specifications are subject to change along with software updating. Please refer to your product.
General Troubleshooting Trouble Possible Causes Solution Failure to power on • Dead battery • Plug in the charger to charge the battery. Automatic shutdown during operation • The automatic shutdown function is enabled. • In standby mode, automatic shutdown is • Dead battery. • Set time/date. activated when no time is set. • Plug in the charger to charge the battery.
Warranty & Support Warranty The Rexing S1 Pro Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
FCCID: 2AW5W-S1PRO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
