User Manual

23
The range of calibration of the line adjustment is limited. If extreme adjustment is
still unsatisfactory, it will be necessary to adjust the mounting position of the camera
or perform fine adjustments of the lens so as to align it in the rearward direction.
Note:
6. Warning Range Setup:
BSD Calibration
Move the red line to the interface
between the sky and ground. Move
the green line to the focal point where
the road intersects with the horizon.
Move the yellow line to the interface
between car’s tail and the ground.
18:03
12-05-2019 Thursday
Next
Pause
BSD Calibration
The left and right box
areas are warning areas.
18:03
12-05-2019 Thursday
Save resultTesting on
Click to switch among the four corners of both the left and right square
zones. The corner indicated by the red spot means the zone is currently
adjustable. Click to adjust the warning range. By touching one of the four
arrows you may move it up, down, left, or right. Click Save after making the
appropriate adjustments. Only in this way can the calibration data be saved.