User Manual

21
Setup Steps:
1. Open the smart driving application and turn on BSD (Blind Spot Detection). The
button turns from gray to blue.
2. Click to enter BSD setup interface. Click the option Warning Speed and select
the appropriate option (a default value can be used). The Warning Speed means
that when any vehicle is detected within the set warning range, an alarm is
activated if the driving speed of the car is greater than the set value.
3. Click the option Warning Sensitivity and select an appropriate option (a default
value can be used). Warning Sensitivity means that when any vehicle is detected
within the set warning range, an alarm is activated if the driving speed of the
following vehicle is greater than that of the car. High: An alarm is activated
regardless of car speed. Moderate: An alarm is activated if the following vehicle
has a speed 10km/h greater than the car. Low: An alarm is activated if the
following vehicle has a speed 20kg/h greater than the car.
Car Warning Speed BSD setup
>= 0km/h
>= 20km/h
>= 50km/h
Car
Warning
Speed
Warning
Sensitivity
18:03
12-05-2019 Thursday