User Manual

The range of calibration line adjustment is limited. If the extreme adjustment has
reached the its limits and the result is unsatisfactory, it may be necessary to adjust
the mounting position of the dashcam or perform fine adjustments of the lens so as
to align it properly within all angles.
Note:
19
5. When the adjustment is accurate as shown above, save and exit.
4. Click to access the ADAS calibration page. You will initially see the concept
and a brief introduction on the calibration page. Click Next to access the real
calibration interface, as shown below. Move the red line up or down align with the
horizon (the intersection line between the sky and ground). Move the yellow line
up or down to the interface between the engine hood and ground. Move the green
line left or right to the focal point where the far end of the road intersects with the
horizon.
ADAS Calibration
Move the red line to the intersection line
between the horizon and Earth. Move
the green line to the focal point where
the road intersects with the horizon.
Move the yellow line to the interface
between the engine hood and ground
18:03
12-05-2019 Thursday
Save