User Manual

22
Troubleshooting/FAQ
Still Photo and/or Video
Quality Problems
a. Check the battery indicator icon to see
if battery power is full.The flash will stop
operating near the end of the battery life.
b. You will get the best results when the subject
is within the ideal flash range, no farther than
65FT.
c. Please note that when the Capture Number
parameter is set higher than "
1 Photo"
, or with
very short interval settings,some images
may
appear darker than others due to the quick
response and rapid re-triggering of the
camera, allowing less time for the flash to fully
recharge before firing again.
Make sure that the camera is not aimed at the
sun or other light sources during the day.
Make sure that the camera is not aimed at the
sun or other light sources during the day.
a. In some cases with low lighting conditions
and fast moving subjects, the 32MP, 20MP,
16MP, or 12MP resolution settings may not
perform as well as the 8MP setting.
b. If you have multiple images where fast
moving subjects produce streaks on the
photo, try the 8MP setting instead.
a. Check to make sure that the SD card is not
full.
b. Make sure that the camera has good
batteries in it. Near the end of the battery life,
the camera may choose to record shorter
video clips to conserve power.
Subjects may appear too bright at closer distances.
1. Night photos or videos appear
too dark
4. Daytime photos or videos
appear too bright
2. Daytime photos or videos appear
too dark
5. Photos with streaked subject
6. Short video clips-not recording the
set length
3. Night photos or videos appear
too bright