User Manual

19
Wi-Fi Connect
Connect to Wi-Fi
Step 1. Download and install the GCamPro app
by scanning the QR code on the right, then turn
on the Bluetooth and Wi-Fi functions on the
mobile phone;
Step 2. Switch the power button of camera from
"OFF" to "ON";
Step 3. After 15 seconds countdown, the
camera enters the sleep working mode. (If the
camera is already under the sleep working
mode, please ignore steps 2 and step 3);
Step 4. Open the GCamPro app, press the "Add
Camera" button, and allow GCamPro to use
your Bluetooth by clicking "OK". Go ahead and
click "+Add" to jump to the Bluetooth list.
Step 5. After you've turned the Wi-Fi on, go to
your Wi-Fi network and find the Wi-Fi named
"Trail Cam Pro******" (if you cannot see this,
please wait for about 10 seconds or refresh),
then enter the initial password "12345678" to
connect to the Wi-Fi.
Step 6. After the Wi-Fi connection is successful,
please go back to the app. Users can operate the
corresponding functions in the app.
Step 7. After you've completed the app
operation, return to the main interface, click the
Power off button in the upper right corner to
shut down and exit the Wi-Fi connection, and the
device will enter the sleep-hunting mode.
11:15
Add Camera
4G
GcamPro
GcamPro
11:15
4G
GcamPro
Bluetooth List
GamPro
E0:9F
2A:E9:CD:94
Add
CANCEL