User Manual

14
Serial No.
Password Protection
Select ON if you want to use a password to
protect the camera from unwanted access, You
can set a 4-digit combination. Once the code
is set, the camera will prompt you to enter the
correct code. The default password is 0000.
If you forget the number combination, proceed as
follows to unlock the camera and to reset it to its
factory default settings:
•
Copy the file "FWDLJA.bin" from the supplier
onto an empty memory card.
• Insert the memory card into the device while
the operating mode selector switch is set to
the OFF position.
• Keep the button pressed while moving the
operating mode selector switch to the SET
position. Keep the button pressed.
• After about 5 seconds the camera reset
finished.
Select On if you want to use a serial number
to rank the camera. You can set a 4-digit
combination. This helps multi-camera users
identify the location when reviewing the photos,
since each camera will imprint its number on all
photos it captures.
Camera Operation
Languages
Here you can set English, German, Finnish,
Swedish, Danish, French, Italian, Dutch, Spanish,
Portuguese, Japanese, or Chinese as the menu
language.
Time & Date
Here you can set the date format YYYY/MM/
DD. DD/MM/YYY or MMDD/YYY), the time format
(12/24 hrs), the time and date. Use LEFT and
RIGHT keys to move to the next field. Use UP or
DOWN keys to change the setting, pressing OK
button to save.
Photo Stamp
Select ON to record the temperature, moon
phase, date, and time on each photo (only for
photos). Select OFF for no imprint.
Format Memory Card
Delete (erase) all files stored on a card to prepare
it for reuse. Always format a card that has been
previously used in other devices. Caution! Make
sure you have downloaded and backed up any
files you want to preserve first! Press OK to
execute, press MENU to exit without formatting.