User Manual

13
Camera Operation
Target Recording Time
Select "On" if the camera should only be active
during a specific time. You can then set the start
and end time for the active phase in the screen
menu that subsequently appears. The settings
made here apply every day.
The camera will not record any images outside of
the active phase.
Time Lapse
Time-lapse model disables the PIR sensor;
instead, it takes photos or records video clip
automatically at your choice of intervals. This has
the advantage of scouting further distances that
is out of the PIR sensor’s range, such as big open
areas (food plots, fields, etc.) or monitoring the
flowering, sunrise, and sunset.
When you confirm "On" by clicking the OK
button, you can then set the desired time interval
using the menu that now appears.
13
Settings
Au
Sh
Si
Se
Ta
Ti
Set
target recording time
Stop:
Hr: Min
00 00
Start:
Hr: Min
SelectBack
okMENU
00 00
Settings
Au
Sh
Si
Se
Ta
Ti
SelectBack
okMENU
Set time lapse
Notification: Motion
sensor deactivated
Hr: Min: Sec
00 00
00