User Manual

GPS

The built-in GPS allows you to view and track the speed and location while

driving.

1. Press the OK button to stop recording

2. Press the MENU button twice to enter Setup Setting

3. Press the UP or DOWN button and toggle to "GPS"

4. Press the OK button to turn it on/off.

Note:

If you do not use the parking mode function, please change the G-Sensor setting to

low sensitivity. Otherwise, the dash cam will easily lock the videos and these videos

cannot be deleted by the loop recording function. This will cause the memory card

to be full of locked videos and cause the recorder to fail to work normally.

To use this feature, you need to connect it with an Intelligent Hardwire Kit (ASIN

B0973MBCT8, sold separately). Make sure that the Parking Mode is turned off on

your dash cam.

Once the sensor has detected MOTIONS. The intelligent hardwire kit will power up

the dash cam automatically and start recording until the MOTION is cleared.

Option 2: Motion Detection

GPS Player

Please download GPS logger player through the link KTWFVI\MRKYWEGSQ

OR Scan the QR Code below.