V2 PRO-AI User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved [[[ VI\MRKYWE GSQ
Overview Thank you for choosing REXING! We hope you love your new products as much as we do. If you need any assistance, or have any suggestions to help us improve, please contact us. care@rexingusa.com (877) 740-8004 Our Support team will respond to you as soon as possible. Always a surprise in Rexing. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
Package Contents OK M 1 2 3 V2 PRO-AI User Manual Safety Guide 安全ガイド The information in this manual is subject to change without notice. Rexing All Rights Reserved [[[ VI\MRKYWE GSQ ZZZ UH[LQJXVD FRP 4 5 6 7 1. Rexing V2 Pro AI Dash Camera 5. Cable Management Kit 2. Power Cable 6. Safety Guide 3. Rear Camera with Rear Camera Cable 7. User Manual 4.
Product Overview POWER 1 2 3 10 11 9 OK M 4 5 6 7 8 1. Power Port 7. Audio Button 2. Micro SD Card Slot 8. Record/Confirm/Wi-Fi Button 3. Rear Camera Port 9. 330° Rotatable Cabin Cam with Infrared Lights 4. Menu Button/Mode Button 5. Screen View Switch Button 10. Power Indicator 6. Power Button/Screen Button 11.
Button Function ƍ Press to turn on or turn off the screen ƍ Press and hold to turn on/off the device manually OK M ƍ Press to confirm a selection while in setting mode ƍ Press and hold 3 seconds to turn on/off the Wi-Fi feature ƍ Press the OK button to stop the recording first.
Camera Overview 1 2 3 00:00:39 4 5 13 14 02:13:12 FHD+FHD ADAS QHD+FHD 12 11 6 10 7 10/15/2021 9 13:45 13:45 10/15/2021 8 15 1. Recording Mode 10. Microphone 2. Recording (On) 11. G-Sensor Sensitivity 3. Recording Length 12. Loop Recording 4. Wi-Fi 13. Remaining Available Space 5. Resolution 14. ADAS 6. GPS Signal 15. Front Camera Alignment Line When adjust the front camera, make sure that this red line is aligned with the front edge of the hood horizontally. 7.
Get Started Step 1 Install the Front Camera Attach the adhesive mount to the desired location on the windshield and leave it alone for at least 20 minutes before mounting the dash cam onto it. Make sure that the dash cam is placed in the middle of the windshield (behind the rear view mirror), and in a safe, appropriate location where it does not obstruct the driver’s view. M OK Step 2 Install the Rear Camera As shown below, wire the rear camera on the rear windshield.
Step 3 Insert a Memory Card You will need to insert a memory card before recording. The dash cam supports Micro SD cards with a capacity of up to 128GB. For reliable operation, use a Class 10 memory card with a capacity of at least 32GB. Depending on the memory card manufacturer and type, some cards may not be compatible with the device. Using an incompatible card may damage the device or the memory card, or corrupt the data stored on it.
Step 4 Connect to the Power and Format the Memory Card Connecting the power cable to the vehicle's 12V-24V DC outlet. Be sure to only connect using Rexing approved power cable that is designed and supplied specifically for use with your device. Using an incompatible charger can cause serious personal injury or damage to your device. a. Press the OK button to stop recording b. Press the MENU button twice to enter the Setup Settings c. Press the DOWN button to navigate to the *SVQEX option d.
Note: Please format the memory on the dash cam before using it. Before formatting a memory card, always remember to make backup copies of all important data stored on the device. The manufacturer’s warranty does not cover the loss of data resulting from user’s actions. It is recommended that you reformat the memory card every time videos are transferred to the computer, or at least once a month.
Basic Operations Menu Settings Resolution The dash cam can record videos in two or three channels. ƍ Three-channel Mode: Front camera resolution: 1080p Cabin and rear camera video resolution: 2304x648 ƍ Two-channel Mode: Front camera video resolution: 1080p Cabin/Rear camera video resolution: 1080p Memory Card Size 1080p Resolution 720p Resolution 16GB 2.
Loop Recording With the loop recording feature enabled, the device will continuously erase the oldest video as it records new videos. Note: Any locked video files on the memory card will remain protected, and will not be automatically deleted during loop recording. :MHIS 1 Minute 3 Minutes 5 Minutes 1/3 Date Stamp The date stamp can be viewed in the video Plate Number The plate number can be shown on the screen. :MHIS A B C .
Record Audio You may choose to record audio with video, or not. G-Sensor If a change in gravitational forces is detected, such as in the event of a vehicular accident, the G-Sensor will send a signal to the camera and automatically place a file lock on the current video. Which will preserve your most crucial footage. Locked videos can be found on the memory card under “\event”.
Sensitivity Choose a desired sensitivity level for ADAS and LDW. :MHIS Low Sensitivity Medium Sensitivity High Sensitivity 3/3 Date/Time Use the following procedure to change the device’s time, date, and the date format. 7IXYT 09 / 28 / 2021 13 : 14 : 40 MM/DD/YY 1/4 Auto Power Off The dash cam will be powered off after a selected range of time. Beep Sound Allows you to turn the device's button sound effect on or off.
Frequency This light frequency should be set according to the power supply specification used in your country or geographical region (U.S. users should select the "60Hz" option). Language There are multiple languages that are available to choose from the settings. 7IXYT English Français Español Português 2/4 Lights Up Use the following procedure to turn on or off the infrared lights. Daylight Saving Enable this feature when your region is in daylight saving time.
GPS Speed Units Select your preferred speed unit (KM/H, MPH) to view on the device and in the video. 7IXYT Off KM/H MPH 3/4 Screen Saver Select a time duration for the screen to stay lit after recording starts.
Note: With the Speed/Date screensaver selected, you may review the speed and date on the screen after 60 seconds without taking any actions on the device. 7IXYT 000 mph 1:50 PM SEP.28 -TUESDAY 3/4 Alternatively, you may also press the POWER button to turn the LCD screen on or off. Default Setting Performing this operation will reset all of your device's settings to their original values. Note: Any user-customized settings will be lost.
Wi-Fi With the built-in Wi-Fi, you can remotely view, control your dash cam and download files to your phone. You can press and hold the OK button for 3 seconds to turn on or turn off the Wi-Fi feature. App Connect 1. Download the Rexing Connect App from either the Apple App Store or Google Play. 2. With the Wi-Fi feature on, open "Setting" on your phone.
Parking Monitor To activate the Parking Mode, you'll need to connect to a smart hardwire kit or an intelligent hardwire kit. Parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged. Option 1: Vibration Detection To activate the Parking Mode, you need to connect it with a Smart hardwire kit (ASIN:B07RN24B7V, sold separately). 1. Press the OK button to stop recording 2.
Note: If you do not use the parking mode function, please change the G-Sensor setting to low sensitivity. Otherwise, the dash cam will easily lock the videos and these videos cannot be deleted by the loop recording function. This will cause the memory card to be full of locked videos and cause the recorder to fail to work normally. Option 2: Motion Detection To use this feature, you need to connect it with an Intelligent Hardwire Kit (ASIN B0973MBCT8, sold separately).
The video track player enables the display of traveling track information when playing a video. Operating Steps: 1. Connect the MicroSD card to the computer via a card reader. 2. For the initial operation, please copy the link contained in GPS Player Download.txt to the browser and open it in the browser. Depending on your computer system (32 or 64 bit), select an appropriate player program and download it to your computer for installation. 3. After installation, click the shortcut icon to run the player.
a. Video Play Window. If the video files of front and rear road tracks are recorded synchronously and loaded into the playing list at the same time, they can be played separately in split left and right screens. b. Play Control Panel c. Open a Video File Press the button and select storage path. When you find the desired video file, click on the video and load it into the play list to play it.
Video Playback To playback on a Computer 1. Unplug the used MicroSD card and place it into a card reader 2. Connect the card reader to the USB port of the computer. Open the removable disc and you will see the following file folders • PICTURE: Pictures saved • VIDEO_F/VIDEO_R: Video records of front and rear road tracks • VIDEO_F_LOCK/VIDEO_R_LOCK: locked video records of front and rear road tracks Note: Be careful when deleting any locked video. Important videos, if any, should be backed up. 4.
Specifications External memory Class 10 or higher Micro SD card (up to 256GB) Speaker Internal MIC Internal high-sensitivity mic Video Format MP4 Photo Format JPG Video Resolution UHD P24/QHD P30/THD P60/FHD P30/HD P60HDP30/FHD P30+FHD P30/HD/1.
Troubleshooting and FAQ Problem Possible Cause Solution Images are not being saved Memory card is full or malfunctioning Format memory card or replace with a new one None of the buttons are responding Processing error or faulty device operation. Memory card contains errors or is damaged. Press RESET to restart the camera. Format the memory card. If the issue persists, replace the memory card.
Problem Possible Cause Solution Memory card won't stay in Memory card isn't compatible/thin ƍ Use your nail or a coin to push the memory card in until it clicks. ƍ Use a new memory card. Memory card isn't The memory card recognized needs to be formatted (cluster error) Formatted the memory card. If the issue persists, replace the memory card Can't find locked files When you lock a file, it only saves the current recording.
Problem Possible Cause Solution Loop Recording isn't functioning G-Sensor sensitivity is too high/ card is full Auto On/Off isn't working The car charging port has a continuous flow of power This feature can only work if it is being used in a charging port that turns off with the vehicle Losing/Resetting date Firmware is outdated ƍ Updating firmware ƍ Update time in GPS settings ƍ Make sure the Gravity Sensing is set on low sensitivity. ƍ Format the memory card.
Warranty & Support Warranty The Rexing V2 PRO-AI Dash Cam comes with a full 12-month warranty. If you register your product on our official site https://www.rexingusa.com/support/registration, you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
FCCID: 2AW5W-V2PRO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
