User Manual

► The supplied wall plugs are only suitable for mounting on

concrete and stone. Before starting the installation, please

check your installation location carefully for its suitability for

the plugs.

The assembly material used must be suitable for the

respective location. If in doubt, consult a professional.

Install Steps

♦ Mark the drill holes by holding the foot of the wall bracket

at the desired mounting location and marking the hole

positions.

♦ Use a drill with a 6 mm drill bit to drill the required holes

and insert the plugs and insert the wall plugs flush with the

wall.

♦ Screw the wall bracket to the wall using the supplied

screws .

♦ Mount the camera on the tripod screw and screw the

camera a little way on (about three turns).

♦ Turn the camera in the desired direction and lock it with

the lock nut .

♦ To move the camera into its final position, undo the two

pivot bolts a little, position the camera and fix the position by

tightening the two pivot bolts .