User Manual

Projection Setting
Projector Settings
Projector Diret
Auto Correct
Manual Correct
Quadrangular Correction
Stepless Zoom
Zooming Ratio
Vertical Zoom
horizontal Zoom
Gyroscope Level Correction
Front
On
0
100
16:10
0
0
Settings
Projector Settings
LED Bright
Picture Mode
3D
Front
User
Normal
Close
In the Settings interface, select Projector setting;
1. Projection Method
Choose “Projection Diret” and press the OK button to choose the desired projection
method.
2. Quadrangular Correction
Select "Quadrangular Correction" and press the arrow keys on the remote control to
adjust the four corners of the picture until they are at right angles.
3. Choose Zooming Ratio and press the OK button to set 16/10 & 16/9 & 4/3 respectively.
When Auto Correct is on, the projector supports vertical keystone correction.
Note:
When the automatic trapezoidal correction angle is not correct, you can turn off the Auto Keystone
function and place the projector on the horizontal table to perform Gyroscope Level Correction. When
Auto Correct is turned off, the vertical & horizontal or Quadrangular Correction can be manually set.
13