User Manual

7
Warning
Different motorcycles can have different
positioning point for your lenses. In some
cases, you can stick your lenses upside
down. If this is the case, you need to
adjust the recording angle.
1. Unscrew the lens support fix.
2. Turn the cylinder-shaped lens body 360 degree.
3. You can adjust lens vertical angle up to 270 degrees.
• Lenses are Water Proof (IP67)
• If cleaning is necessary, please use a gentle cloth to clean lenses
• Please clean any water, oil stain, or dust before sticking your 3M
Adhesive Pad. If you relocate your lenses repeatedly, the 3M Glue
ability to stick will weaken, and your lens may fall.
• When you accelerate, the image quality may not be very stable,
this is the character of CMOS sensors. Please be aware, this is
not part of agreement.
!