User Manual

3. Install a Micro SD Card
9
Make sure your
camera’s power is off,
and make sure you
insert card correctly,
push the card into the
card slot until you
hear a click.
Make sure your camera’s power is
off, push the card in the card slot
until you hear a click, then you are
safe to remove your micro SD card.
• Please use 8GB to 128GB micro SD card.
• Please use “Class 10 UHS-1” or higher standard card and higher speed card. If you
use class 10 or lower standard cards, the camera may not able to film.
• Please format your micro SD card before use.
Note:
1. Format will delete all contents in your SD card, please backup your files before
formatting.
2. Do not release your finger before removing the memory card.
3. Format regularly. We recommend once a month.
4. If you are removing or inserting micro SD card while power on, it may damage
your data or your camera.
Micro SD card installation
Micro SD card removal
000
08:55
KM/H
000
08:55
KM/H