FM Transmitter FMT2 User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.
Overview Thank you for choosing REXING! We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us. care@rexingusa.com (877) 740-8004 Our support team will respond you as soon as possible. Always a surprise in Rexing. Check us out here. • https://www.facebook.com/rexingusa/ • https://www.instagram.com/rexingdashcam/ • https://www.rexingusa.
Product Overview 1 7 4 11 106.2 8 6 /CH 5 QC3.0 PD20W 10 LINE OUT 9 2 3 1. Unidirectional Microphone 2. QC3.0 Fast Charging Port (DC3.5-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A) 3. Type-C Charging Port: Support PD3.0 (20W) charging protocol 4. Combination Function • Noise canceling button • Long press for 2s to shut down (retain charging function after shutting down) 5. Music Mode: previous song Mode Switching: long press 2s (loop, single, random) to play 6.
What's in the Box? 106.2 /CH FM Transmitter FMT2 User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved QC3.0 www.rexingusa.com PD20W 1 1. FM Transmitter 2. User Manual 2 3 3. Air Vent Bracket 4. 3.5MM Audio Cable 4 5 5.
Getting Started Product Installation 1. Put the threaded knob on the end of the air vent bracket. 2. Insert the set of air vent bracket into the round hole at the back of the main unit. 3. Tighten the thread 4. Open the air vent bracket and insert it into the car air-conditioning air vent grille, tighten the screws to the best strength, adjust the angle of the FM transmitter, and then use it. 106.2 /CH Power ON/OFF Turn on: Insert the FMT2 into the cigarette lighter hole of the car.
Basic Operations FM/Bluetooth Pairing Note: In order to let you enjoy higher-quality music, you need to adjust the blank frequency to be the same as that of the car (non-local broadcast channel) when using it for the first time. Every time you use it, please make sure that the frequency between the transmitter and your car is the same (not the local broadcast channel). FM Pairing 1. Turn the car radio to a blank frequency point (a channel without any broadcasting). The reference is: clear rustling. 2.
a. Find a blank frequency in your car radio (to ensure the sound quality of the device, please first select a blank channel with no local broadcast programs) b. Long press In FM mode: to enter FM mode Left-hand knob button CHTurn the knob to the right key CH+ In music mode: Left-hand knob button volume VTurn the knob to the right button volume V+ c.
Music Function 1. Audio source: Bluetooth/Micro SD Card Music sound effect: default stereo sound effect playback a. Micro SD Card Mode: Insert a Micro SD card containing MP3 / WMA / APE / FLAC / WAV / APE files into the transmitter, and the transmitter will automatically start playing the files. When there is an incoming call, this device will automatically switch to the call. b. Bluetooth Mode: Refer to the instructions of the smart device. Such as phone.
High-speed Noise Cancellation • During a call, click the button to enter the high-speed noise cancellation mode, and there will be a Dingdong voice prompt. When talking with the other party, the noise in the car environment will be suppressed, so that the person who answers the call can enjoy a clear and interference-free call experience. • Click the button again to exit the high-speed noise cancellation mode. QC3.0 Charging Port • The output power is 18W, compatible with FCP/QC3.0/QC2.0/BC1.2/DCP, etc.
• Adjust the direction of the microphone until it is directly facing the driver. • Press the button during the call (when you hear the tone, turn on the road noise reduction mode). Ambient Light Color Switching Long press the button in any mode to switch the ambient light (red /green/blue/yellow/purple/sky blue/white/orange/multi-color light rotation).
How to install the fuse? 1. Rotate the screw on the bottom of the Bluetooth FM transmitter counterclockwise. 2. Insert the fuse into the screw hole with the metal tip, the metal on the edge of the fuse will be attached to the metal tip. 3. Assemble the rubber gasket. 4. Assemble the metal gasket. 5. Turn the screw clockwise to the bottom of the Bluetooth FM transmitter. Frequently Asked Questions 1. Noise issues Solution: a.
Warranty & Support Warranty The Rexing FMT2 FM transmitter comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
FCC ID: 2AJ5B-BT95 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
