B1 Basic User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.
Overview Thank you for choosing REXING! We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us. care@rexingusa.com (877) 740-8004 Our support team will respond you as soon as possible. Always a surprise in Rexing. Check us out here. • https://www.facebook.com/rexingusa/ • https://www.instagram.com/rexingdashcam/ • https://www.rexingusa.
Table of contents I. Product Overview·············································································· 1 II. Specification ····················································································· 1 III. Insert or replace batteries ······························································· 2 IV.
I. Product Overview 1.Lens with manual focus 7.Mode Button 2.USB port/Micro SD card slot Cover 8.Menu Button 3.IR Up/Zoom in/Up Button 9.Display Screen 4.IR Down/Zoom out/Down Button 10.Battery Cover 5.Shot Button 11.Strap Hole 6.Power Button 12.Infrared filter cap II. Specification • • • • • • • Photo Resolution: 1M(1280x960)by interpolation / VGA(640x480) Video Size: 960P(1280x960@30FPS )by interpolation / VGA(640x480@30FPS) Aperture: F 1.
• • • • • • • • • • Viewing Distance in all dark: 150-200M Viewing Distance in weak light or day time: 3M~infinity IR LED: 3W,850nm strong infrared spotlight,7 grades infrared adjustment Operation Buttons:6 buttons USB Port: Micro USB 2.0 Power Source: 7.5V, 5xAA Operating Temperature: -20℃ to +60℃ Storage Temperature: -30℃ to +70℃ Dimension: approx.149*63*49mm Net Weight: approx.170g III. Insert or replace batteries Remove the battery cover on the right side of the device.
SD card, this can improve the battery life and shutter speed. To remove the card from the memory card slot of the device, press the edge of the memory card in gently, the card will pop out. Then remove the card. Basic operation I. Starting up Keep pressing the power button (6) for 3 seconds to turn on the device. Keep pressing the power button (6) for 3 seconds again to turn off the device. II. Changing The Modes The night version has 3 different modes: photo mode, video mode and playback mode.
III. Taking pictures 1. Turn on the device, the default is Video mode,press the mode button (7) to switch to photo mode. 2. Zooming: Keep pressing the or button (3 / 4) to zoom in or zoom out. The value of magnification level appears on the LCD screen. 3. Take a still photo. - View your subject via the LCD screen. - Press the shot button (5) to take a photo. Photo mode Zoom in 4X Brightness of IR from 1 to7 IV. Recording Video 1. Turn on the device,the default is Video mode.
Keep pressing the or button (3 / 4) to zoom in or zoom out the image. The value of magnification level appears on the LCD screen. 3. Start to record video. - View your subject via the LCD screen. - Press the shot button (5) to start to record. The record duration will be shown on the LCD screen. 4. Finish recording. - Press the shot button again to stop recording. - The device will stop recording automatically once capacity of the memory card is full.
IR – LED (Night vision function) In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LED, the image will change to black and white. The IR LED have seven levels, short press IR UP button to up the level, short press IR DOWN button to down the level. Note: If the battery voltage is not enough, the IR LED level will down automatically. IR level can up to 7 levels when the battery power is full.
Power Save Date&Time Date Stamp Language Format Set the time to shut down the device for power saving if the device is idle. Options:[3min]/[5min]/[10min]/[OFF]. Set the date and time of device. Add the date stamp on the photo or video files. Options:[Off]/[Date]/[Date&Time]. Set OSD (on-screen) language. Options:[English]/[Simplified Chinese/ [TraditionalChinese]/[French]/ [Nederlands] / [Espanol]/[Italiano]/ [Portugues] / [Deutsch]/[Russian]/ [Japanese]/[Korean]. Format your TF card.
Playback menu list : Menu Lock Delete Function Lock or unlock the current one file or all files in memory card. Options:[Lock/Unlock onel]/[Lock All]/ [Unlock All]. Delete the current one file or delete all files in memory card.Options:[One]/[All]. Download files to PC I. Connecting the device to a PC through the USB cable 1. Turn on the night vision. Connect it to a computer through the supplied USB cable. 2. When connecting to the computer, it will appear “MSDC” on the screen. 3.
Do not use abrasive cleaners to clean the device. This device is a high-precision optical instrument, so in order to avoid damage, please avoid the following practice: Use the device in ultra-high or ultra-low temperature. Keep it or use it in moist environment for long. Use it in rainfalls or in water. Deliver or use it in strongly shocking environment. Remove the batteries from the device if it is not used for a longer time.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
