Instruction manual

4
Specications
SmartCut™ A425
2101965
10
A4, A5 & A6
Centimetres and Inches
300mm
1-5 sheets
1-5 sheets
1-10 sheets
Models
Product code
Sheet Capacity 80g/m
2
Integrated Paper Guide
Size Guide
Cutting Length
Score
Wave Cut
Perforate
SmartCut™ A445
2101966
10
A3, A4, A5 & A6
Centimetres and Inches
457mm
1-5 sheets
1-5 sheets
1-10 sheets
1
Rotary blade housing
2
Metric and Imperial scale guide
3
Transparent cutting edge guide
4
Trimmer base with calibrated grid
5
Cutting mat
6
Cutting mat removal groove
7
Usage Blocks
8
Parking Areas
m
NOTE: Please retain this information regarding
safe operation of this paper trimmer
m
CAUTION: Trimmer should be operated by an
adult or under adult supervision
m
CAUTION: Sharp blade, do not touch the edge of
the blade
Selecting your blade
1
Place the trimmer on a stable, at surface such as a
table or desktop. Slide the rotary blade housing to the
“parking position” at the top or bottom of the stationary
rail (A1–P). Push and hold the rotary dial in while turning
to select function (A2); straight cut, wavy cut, perforation
or score.
Operating the trimmer
1
Place the material to be trimmed at the selected position
using transparent paper guide and hold the material
securely in place with left hand while cutting (B).
Tip: In addition to using the grid pattern and scale for
alignment, use the transparent cutting edge guide to
quickly and accurately align your cuts.
2
Push down rmly on the rotary blade housing (C1) and
slide to opposite end in one motion while keeping the
rotary blade depressed (C2).
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal lm, lm containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting blade
handle.
• Always operate trimmer with both hands and on a stable
base or desk.
• Check the ttings of the rotary blade and safety cutting rail
from time to time.