Operation Manual

19
INDICATOR
LIGHT CODE
POTENTIAL CAUSE CORRECTIVE ACTION
Continuous
Light
Unit is turned on while hose
handle trigger is in “locked-on”
position (Power Nozzle will emit
pulsing sound).
Release hose handle trigger lock for
3 seconds.
Resume normal use.
Blinks 2 Times,
Repeats
Power Nozzle brush roll is
obstructed.
Turn unit o / unplug unit.
Remove debris from Power Nozzle
brush roll.
Resume normal operation.
Electrical connections are wet. Turn unit o / unplug unit.
Dry electrical connections.
Resume normal operation.
If the corrective action does not
 x the problem:
Contact an Authorized
Distributor or Service Center.
Blinks 4 Times,
Repeats
Electrical connections are wet. Turn unit o / unplug unit.
Dry electrical connections.
Resume normal operation.
If the corrective action does not
 x the problem:
Contact an Authorized
Distributor or Service Center.
Blinks 6 Times,
Repeats
Electrical hose or wand
connection problem.
Contact an Authorized
Distributor or Service Center.
user troubleshooting guide
Your Rainbow® is equipped with a feature that disconnects the power to the accessory hose under certain
abnormal conditions.