User manual

26
The digital display indicates:
- the level of hardness to which the water softener is set
- if the audible signals are activated/deactivated
- if the rinse aid inflow is activated/deactivated
- The number corresponding to the selected washing
programme
- the delay start
- the approximative remaining time of the running programme
- fault codes concerning malfunction of the dishwasher
"Extra Rinse" option push button : this option
allows to add another rinse before the last hot rinsing phase.
This option is only available with some washing programmes
(see Washing programmes chart).
Option available: push button activated - indicator light on
Option not available: push button deactivated - indicator light
off.
Push button "3 in 1": This appliance is equipped with the
option 3 in 1, that allows the use of the "3 in 1" combi
detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this option (push button indicator light
illuminated ) it will remain active also for the following washing
programmes, to deactivate the function, press the push button
(push button indicator light off).
Push button "Cancel": it allows to cancel a washing
programme in progress with eventual options setted and to
cancel a delay start in progress.
Indicator lights: have the following meanings:
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
"Setting of the water softener"
"End of programme"
"Something not working with the machine"
Deactivation/activation of the audible
signals
(The dishwasher must be switched off)
1. Press the On/Off push button. The indicator light of the
programme selection push button will illuminate and in the
digital display are visible 2 horizontal lines (--) (setting
mode).
If in the digital display are not visible the 2 horizontal lines,
this means that a washing programme has been selected.
The programme must be cancelled.
Press the push button Cancel for about 3 seconds.
The indicator light of the programme selection push button
will illuminate and in the digital display will appear 2
horizontal lines, this means that the selected washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function push buttons 2 and 3, the
indicator lights of the function push buttons 1, 2 and 3 start
flashing.
3. Press the function push button 3, the indicator lights of
function push buttons 1 and 2 turn off while the indicator
light of the push button 3 goes on flashing, the digital
display indicates the current setting.
4. To change the current setting, press again the function
push button 3, the digital display will indicate the new
setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off push button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
salt refilling indicator light, illuminates when the salt
has run out
rinse aid refilling indicator light, illuminates when
the rinse aid has run out
Audible signals deactivated
Audible signals activated (factory set)
"Extra rinse" option - push button actvated
available - indicator light on
"Extra rinse" option - push button deactvated
not available - indicator light off