User manual

1. On/Off push button
2. Salt and rinse aid refilling indicator
lights
3. SID indicator light
Illuminates when programme 2 (Intensive 70°C) is
selected.
4. Digital display
5. Programme selector push button
6. "Half load" push button
This option is useful and economical when only a few
dishes need washing.
Load the dishes into both baskets.
When selected, the indicator light comes on.
With the following programmes the "half load" option
is not available: programme 1 (Rinse and Hold),
programme 8 (Quick Wash 55°C) programme 11
(Daily 30' 65°C), programme 12 (Plate warmer)
7. Drying options push button
By pressing this button you can opt to reduce the
temperature of the last rinse (no dry) or improve the
drying performance of the programme (super dry).
no dry
super dry
The indicator light corresponding to the selection will
come on.
If both indicator lights are off, the normal drying cycle will
be carried out.
With the selection of programme 6 (Bio 50°C with
prewash) super dry is automatically selected by default.
However it is possible to exclude the super dry option
or select no dry by simply pressing the push button.
With the following programmes the "drying options"
are not available: programme 1 (Rinse and Hold),
programme 8 (Quick Wash 55°C) programme 11
(Daily 30' 65°C), programme 12 (Plate warmer)
8. "Delay start" push button
Allows the start of the programme to be delayed by a
minimum of 1 hour, up to 12 hours.
9. "Cancel" push button
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the pushbuttons are pressed, a short audible
signal informs you that the machine has accepted the
instruction given.
Long "programme run" signal
A continuous audible signal informs you, once closed the
door, that the washing programme is starting.
Intermittent "end of programme" signal
An short intermittent audible signal informs you that the
washing programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm systems to
help you determine the cause of any problems (see
"Something not working").
An intermittent audible signal informs you that an alarm is
activated.
To deactivate these audible signals, press simultaneously both
"programme selector" and "drying options" push buttons for
at least 3 seconds. During these 3 seconds an intermittent
audible signal is heard at the end of which the audible signals
will be deactivated.
To reactivate these audible signals, press simultaneously both
"programme selector" and "drying options" push buttons for
at least 3 seconds. At the end of which an intermittent audible
signal will inform you that the audible signals have been
reactivated.
Both operations (to deactivate or reactivate the audible
signals) can be carried out before starting or during a
washing programme.
Control panel
SO423
18