Technical data

Multi Media
Re:source
7
Important advice
Your network
The following description for the cabling
and the setup makes the assumption that
there is a functioning network with
router available and operational.
If you have any questions about the
setup and configuration of your network
or Internet access, please refer to your
System administrator or an IT specialist
of your choosing.
WLAN Wireless communication
An access point is required for the
wireless communication between the
MMM and the router. This can be an
external unit or it can be integrated in the
WLAN router.
Internet Radio
If you want to use the MMM to receive
Internet radio, there must be a
broadband Internet access to the router.
Setting up the Internet access may
involve further costs. The management
and use of the Revox Internet Radio
Portal is free-of-charge and already
included in the purchase price
Software/Firmware version
MMM 05
The software version V2.12 requires the
firmware Version MMM+3+4+5_SeDMP2
analog iPOD Revox v12771.12.bcd
MMM 06
The software version V2.13 requires
the firmware Version MMM+6_
SeDMP2 digital iPOD Revox v12743.14
dev.bcd
You can check or download the current
firmware version using the
DMP User
Interface
. To do this, enter the MMM’s
IP address into a Web Browser. The
browser
Mozilla Firefox has shown itself
to be very reliable here. The MMM has
to be connected with the network
through a
LAN to carry out the firmware
update. Revox strongly advises against
using a WLAN as this can lead to serious
update errors, which can only be
resolved at the company headquarters in
Villingen, Germany.
Scene control and MMM
If the MMM is used as a source in a
scene control, only the first 8 of the total
of 16 scenes available can be used.
Scenes 9-16 are not supported by the
MMM. Scene control is described in the
Multiroom Module manual.