Technical data

Multi Media
Re:source
5
CONNECTION PANEL MMM 05
1
²
►
WLAN
Connection for the WLAN aerial included with
the accessories. The aerial must be installed to
set up data communication to the MMM using a
wireless LAN.
The WLAN connection is deactivated if a LAN
connection is established.
►
LAN
RJ45 connector for a LAN router in the network.
The WLAN connection is deactivated as soon
as a LAN connection is established.
►
USB
1
USB A connection for an external USB mass
storage (ext. USB hard disc with its own power
supply, USB memory stick) that is formatted
with a FAT16 or FAT32 file system.
►
Portable Player²
Sub-D 15connector for an iPod. There are 3
options for establishing the connection to the
iPod:
1. Direct to the iPod using the adapter cable
supplied.
2. Using the Extension Kit
(Part no.: 1.551.065.00), for longer distances
between the MMM and the iPod or iPod
Docking Station (not included).
3. Through the passive Revox Docking Station
(Part no.: 1.551.061.00 / Full aluminium)
►
DC IN
Connection for external power supply. 5 DVC/3A
pluggable power supply is included in the scope
of delivery.
-> see Fast Start mode (Chapter
Setup #1)
The USB storage may not
exceed the maximum power
consumption as defined by USB
specifications.
Charging the iPod battery
Your iPod's battery is
charged up while it is
being used. No charging
occurs however, while the
M10/ M51 is in standby mode.