Technical data

Multi Media
Re:source
4
Max. number MMM
M51
M10
Without
external power supply ; Fast Start
OFF
1 pc. 4 pc.
With
external power supply ; Fast Start
OFF
4 pc. 4 pc.
With
external power supply; Fast Start
ON
4 pc. 4 pc.
Important advice
Fast Start (ON) is only functionally supported, if an external power supply is used.
Without external power supply
Fast Start must be deactivated (OFF) - see also page 15.
POWER SUPPLY
Generations 5 and 6 of the MMM can be
operated with an external power supply.
This makes it possible to put the MMM
into a quickstart mode (Fast Start), which
significantly shortens access times to
the individual MMM sources after start-
up.
Additionally, Apple devices can now be
charged-up of standby mode. In the case
of an MMM 06 connected via USB, even
up to 1 ampere.
Instead of one, it is now possible to
operate several MMMs in parallel in an
M51 installation, if these are supplied
from an external power supply.
An overview shows what options are
available with the M51 and M10 devices: