Technical data

Multi Media
Re:source
51
NETWORK QUESTIONS / TIPS
The MMM finds my Access Point,
however my computer is not displayed.
• Make sure you have installed a UPnP
server on your computer and that this
is activated. Depending on the amount
of data and the software, it can take a
few seconds before the option appears
as a selection on the MMM.
• You have activated a MAC address
filter on your router. In this case, add
the MMM MAC address to you router
configuration. You will find this on
Setup page #1.
• Your router only assigns fixed IPs.
Deactivate DHCP and enter a fixed IP
address both in the MMM and the
router.
My Access Point's SSID is not listed.
• The MMM can only find your Access
Point if it is within range. Reduce the
distance to the Access Point and try
again.
• Depending on the configuration, the
router's SSID may be hidden. If this
option is activated, the SSID must be
entered manually on page #3 of the
MMM Setup menu.
NETWORK QUESTIONS / TIPS
A lot of Access Points are displayed that
are unknown to me.
If several Access point, for example
those installed in neighbouring buildings
are available to the MMM, these will
also be listed. Select your Access Point
and continue with the configuration.
The MMM indicates to me that my
network is encrypted.
Your network is protected against
external attacks with an encryption
(WEP / WPA). Enter your key in the
MMM Setup so that the MMM is
identified as "User" in the network.
Where do I get my key from?
If you installed your network yourself,
you will have defined it as part of that
work. Otherwise, you will get it from your
System Administrator
Can other data on my network hard disc
or server by read or viewed?
No, the MMM can only receive data that
is released by the UPnP server. In this
way, the MMM only accesses your files.
Other data on your server is not
transferred and cannot be viewed.