Technical data

Multi Media
Re:source
18
Setup #2 - [Source On/ Off]
! Follow me function
It is important that only one source is
visible (on), in order to be able to take
one MMM source from one side room
to another. If 2 or more sources are
displayed, a direct switch to the
selected source is made.
Example: Follow me - active
You are listening to an iPod in Room 1
and then you go to Room 2 and press
the Tuner (-> Internet Radio) button on
the wall-mounted display. If the Follow
me function is active, you will now
hear the iPod in Room 2 as well, even
through the button is assigned to the
Internet Radio. You will of course be
able to select from all available MMM
sources in Room 2 later by going
through the
Home menu.
Example: Follow me - not active
You are listening to an iPod in Room 1
and then you go to Room 2 and press
the Tuner (-> Internet Radio) button on
the wall-mounted display. Now the
iPod playback is interrupted and the
Internet Radio plays the last station to
have been selected.
Note
Each time the equipment is restarted,
the last source to have been selected
is played.
Exception with the iPod : If the iPod
was the last selected source before
the equipment was switched off, the
system starts up with the last Internet
Radio station to have been listened to.
Hidden, but still available
Sources that have been hidden no
longer appear in the
Remote setup
(see basic description of the
Re:system devices) and therefore,
cannot be used for a direct call
through a button.
But you don't have to do without
hidden sources. You can still continue
to reach these indirectly through the
Home menu of the visible source(s).