Technical data

Multi Media
Re:source
13
Setup #1
IP Address
The first page shows the IP address that
the MMM used to login to the network.
If the MMM could not login because of
an incorrect Setup setting or because of
a network problem, the following display
appears in the
IP Address area:
In this case, you should check the
network and/ or the settings you made.
Restart
The MMM must be restarted using the
Restart softkey if Setup changes have
been made, in order for the changes to
be applied. This softkey is only available
on Setup #1.
MAC Address
Display of the MAC address that has
been uniquely assigned to this MMM.
This is important for logging in to the
Revox Internet Audio Portal (IAP)
The MAC address must be defined
WITHOUT the colons shown here, in order
to log the MMM in to the
Revox Internet
Audio Portal
, which offers the
configuration of the Internet radio.
Example above:
MAC Address: 00:1b:9e:87:cb:58
Revox IAP: 001B9E87CB58
Device Name
The name of the iRadio is always used
as the
Device name, irrespective of
whether this is shown or not. Setup #2
shows you how can generate a new
name. The Device name is only of
interest, in order, for example, to be
able to differentiate between different
MMM modules within a Re:system
device when setting it up.



