Technical data

CD Control
Re:source
5
Cabling & Setup
Blu-ray Player: Input IN 4 + RS232
Two connections have to be made between the BDP-93 Blu-ray player and the CD
Control module.
1.) Audio connection input
IN 4
(CD Control module) with the audio output
FL-
FR
(BDP-93) using a stereo cinch cable. If a 5.1 Decoder module is
available in the Re:system M51/M10, a digital audio connection can be
established in addition - see "Configuring the digital input".
2.)
RS232
control connection with a serial null modem cable. The supplied
crossover adapter must be used with the 1:1 cable from Revox.
The cable length between the CD Control module and the receiver should not be
more than 10 metres as otherwise you can expect to experience disturbances and
reduced audio quality.
All further connections between the Blu-ray player and other external devices, e.g.
TV are made in line with your own needs and the system requirements. You will find
the relevant documentation in the Blu-ray player Operating manual.