Technical data

CD Control
Re:source
13
CD Control
A) Display operation
The following control functions are
available at the device or through the
Revox App through the display
operation:
• Play
• Pause
• Stop
• Track (forwards/back)
• Search 1-5 (fast search with 5
speeds)
• Shuffle
• Repeat: Repeat Track/ Disc
• Open/close CD drawer
B) Wall operating panel with M217/
M218
The following control functions can be
carried out through the wall operating
panel, consisting of a combination of
the M217 Display and the M218 Keypad.
• Play (start playing if CD is
selected as source)
• Track (forwards/back)
With an activated IR receiver in the
wall operating panel, all control
commands that the M208 Remote
control makes available with the
"Revox CD Oppo" configuration can be
used - see
M208 Remote control in the
next column.
C) M208 Remote control
IR control through the CD Control
module
The M208 Project Manager offers the
device control "Revox CD Oppo" in the
[Revox] database, which makes the
following CD play control commands
available via infrared:
• Play
• Pause
• Stop
• Track (forwards/back)
All Revox system IR receivers transfer
these commands to the CD Control
module. There, they are converted to
RS232 commands. They
cannot be used
for the direct control of the BDP-93 Blu-
ray player.
IR control of Blu-ray players
The M208 Project Manager database
offers the device control "Oppo Blu-ray
Player" in the [OPPO] section, for the
direct control of the BDP-93 Blu-ray
player though its IR receiver. This
command set contains all the IR
commands of the original Oppo remote
control.
These IR commands cannot be used for
the control of the CD Control module.